Your LGMILL Pro can carve plywood, hardwoods, softwoods, and MDF. It can carve plastics, including HDPE, Delrin®️, polycarbonate, acrylic, and Corian®️.* It can also carve Non-ferrous metals, including aluminum, brass, copper, etc. For optimal results in aluminum and non-ferrous metals, lubrication and tools specifically designed for metals are required. *In order to achieve optimal results when carving, proper cut settings and chip removal are required. 

You can carve aluminum and other non-ferrous metals. For optimal results in aluminum and non-ferrous metals, lubrication and tools specifically designed for metals are required.

The spindle is air-cooled for easy setup and use. You can also use liquid cooled spindle.

Our controller supports laser cutting.

You can use your own spindle, provided you know how to wire it and set up your inverter. We recommend using the spindle we provide, as we have already defined the wiring and paired it with the power supply.

The maximum size material that can be carved is infinite feet long, 1.2m wide, and 0.14m thick.

The footprint for the LGMILL is 1.5mX1.5m

Approximately 160kg.

Yes, as long as your program can export standard G-Code, SVG, or DXF files.

It will ship via LTL freight in several boxes on a pallet with lift gate service included through our carrier. The size of the pallet is estimated around 69.09" x 30.11" x 22.64.

The LGMILL Pro ships via LTL Freight. This is a 300-pound product and requires freight shipping. Shipping services include lift gate delivery. The shipping cost for the machine alone is a flat rate of $373.62. There will be a slight additional charge for the included surfacing bit that ships separately from the machine based on the delivery address. Any additional items purchased with the machine will add shipping cost to the total order. The best way to determine costs is to add an X-Carve Pro to your cart and enter the shipping address. Note: The X-Carve Pro currently is only shipping to USA addresses, including USA territories and military bases. For details, see this guide: Can I purchase X-Carve Pro internationally?

We recommend 6’x6’ for the 4x4 and 6’x3’ for the 4x2.

X-Carve Pro 1 year limited warranty Controller and cables Separate control with Pause, Resume, and Reset button controls, Z-Probe connection point and E-Stop Dust control system - Dust shoe, Hose, Arm Z-probe T-slot wasteboard with threaded inserts - (4x4 model) T-slot clamps (x4) - (4x4 model only) Cutting bits included: Planing bit Standard Threaded Insert Wasteboard Kit (4x2 model) Assembly tools (8) - 4ft level, Allen key set (1.5mm to 6mm), Torque wrench, Metric hex bit set, Metric socket set, 17mm wrench, Square

It takes less than 2 hours to assemble the X-Carve Pro.

The LGMILL Pro plugs into a standard non-GFCI/GFI 120v outlet. Industrial-grade CNC machines that allow for the spindle speed to be controlled by the operator are powered by Variable Frequency Drives that are not compatible with GFCI outlets. We do recommend the LGMILL Pro is on its own circuit, but the VFD for the spindle is integrated into the controller, so you'll only have one plug to put in your outlet.

The rated amperage is 5 amps, and it will work on a standard 20 amp breaker, but it is capable of running on a standard 15A circuit. The actual amperage draw will depend on the the project and cut settings.

The LGMILL Pro recommended operating temperature rating is between 23 F and 104 F.

If you are unable to use one of the existing payment methods (either by credit card or Affirm financing) for X-Carve Pro, please contact help@inventables and we may be able to accommodate other payment methods on a case-by-case basis.

To cancel your order, please contact our Customer Success Team at (312) 775-7009 (Monday-Friday, 9am-5pm CST) or email us at help@inventables.com. If the order has already been shipped, we cannot guarantee a cancelation or a refund of the shipping charges.

If you are interested in purchasing multiple X-Carve Pros, please contact help@inventables.com and we will do our best to work with you on pricing.

Your credit card will be billed once you place your order.

If you finance your X-Carve Pro with Affirm, your first monthly payment is due approximately one month after your order is shipped.

We are currently only shipping to US addresses, including US territories and military bases.

X-Carve Pro comes with a 1-year limited warranty that expires on the first anniversary of the date of delivery of the X-Carve Pro to you. An extended 3-year warranty can be added at the time of purchase when choosing your X-Carve Pro machine or up to 60 days after the ship date.

It is our preference to work directly with customers to fix any issues as quickly as possible to ensure all customers remain happy with their purchases and have a successful experience using our products. If your machine is not performing as expected*, Inventables offers returns on X-Carve Pro machines on a case-by-case basis, excluding original and return shipping, within 30 days from delivery. Full policy here.